Soil Preparation and Analysis
|
Subject: test
|
|
From
|
Location
|
Message
|
Date Posted
|
1000lber |
|
Can anyone interpret and make recommendations for this soil test. metric. ph 6.5 phosphorus 167 mg.l potassium 1.01 me/100g calcium 22.2 me/100g magnesium 3.70 me/100g sodium .16 me/100g CEC 29 me/100g nitrogen 263 kg/ha organic m 11.1%
Available nitrogen and phosphorus seem high. Thanks
|
4/9/2014 1:49:33 PM
|
Bry |
Glosta
|
after running some conversions I came up with the folowing in PPM
Calcium 4440 Magnesium 444 Potassium 393.9 Nitrogen 234.6 and Phosphorus Mg/L is pretty much same aas PPM so it is 167 ppm
that being said your base saturation %'s are roughly
Calcium 81.9 Magnesium 13.5 Potassium 3.7
you could try to get the Potassium up a bit and mag a lil more too
20# of magnesium oxide per 1000 sq ft will raise the mag to around 18.2% base sat, and put your ph at about 6.8-6.9 which is fine
50# of 0-0-50 per 1000 sq ft will raise you potassium to around 7% base sat.
If you add these 2 things your calcium base sat% will end up around 74%
with a high phos you may want to think about a micronutrient supplement, since you didnt get them tested its hard to know if you need them or not, but high phos can mess with micronitrient availability. hope this helps.
|
4/9/2014 9:56:12 PM
|
1000lber |
|
Thanks Bry. Is that 20kg and 50kg? Yes was thinking of adding some boron and copper
|
4/9/2014 10:51:58 PM
|
Bry |
Glosta
|
20 pounds and 50 pounds.
adding boron and copper blindly can have dire consequences. using a chelated micronutrient blend is probably a better way to go and spoon fed the plant through the season.
|
4/10/2014 3:57:26 PM
|
Total Posts: 4 |
Current Server Time: 11/23/2024 6:17:43 PM |