|
Fertilizing and Watering
|
Subject: Some sort of booster pump needed...
|
|
From
|
Location
|
Message
|
Date Posted
|
Steve's Garage |
New Castle, Indiana
|
So for next year I'm looking to run at least four impact sprinklers...maybe six. Right now, the water pressure I have coming from the sill cock spigot is just barely enough to run one...and sometimes it gets stuck with momentary loss of pressure.
So obviously I need a booster pump to run multiple, but I also wanted to run a timer system like the B-Hyve system. Thing is though....I assume the pump will continue to run even when the system isn't running, which would burn up the pump. There's no point in having a timer system if I have to be here anyway to turn the pump on and off.
So...is there a pump I can get that would shut off when the flow of water has stopped? Or even better, is there a timer system that also can shut off power to a pump when not in use?
|
8/22/2023 5:31:03 PM
|
Andy W |
Western NY
|
Could you just plug the pump into a programmable electric timer?
|
8/22/2023 8:57:55 PM
|
pumpkinpal2 |
Syracuse, NY
|
Drummond 1 HP Sprinkler Pump.
Approximately $149 at Harbor Freight Tools. U can search for discounts. I love my pump. I dream of having a few of them when I upgrade to my new patch - they'd still be in boxes for years, though, until my present one retires!
https://www.harborfreight.com/1-hp-portable-sprinkler-pump-1075-gph-63320.html
If not THIS pump due to cost, get one at least with the same specs; Do not under-power your patch with a lesser pump! Here is a picture of mine in all its glory but not a great picture but it has not failed me and has always been overly-powerful for the money:
http://www.bigpumpkins.com/Diary/DiaryViewOne.asp?eid=340388
When the liquid you run is thicker than plain water, it seems to influence the pressure/flow available at each of (MY) Whizzer sprinklers.
It is not a 'good-sounding' pump if it's not full of water during operation, but if and once it IS in an airless system, like brakes on a car, she runs as any other.
65 PSI when closed off and although you're not supposed to do that, I do it as a needed regimen, followed by orchestration of the limiter shutoff valves I show in my Diary. 55-60 PSI, though, when actually running to any sprinkler. They hold back the BEAST!
|
8/22/2023 9:44:05 PM
|
pumpkinpal2 |
Syracuse, NY
|
As with any pump, be CERTAIN that the hoses and fittings can handle 70+ PSI or at least be shielded away, just like mine aren't, lol.
*Once you have a 55-gallon barrel to incorporate, you can add ANYthing you want. ANYthing...
I don't care if you don't use it butt I cannot say anything bad about it - That is a rarity! I had 7 Whizzers running the other day and was perplexed by that #...then, my barrel ran out and I was like 'Well, that'll teach ya!'.
I CAN run 3 Whizzers effectively, 2 amazingly and ONE? ...is fearing for its life at a 40 feet in diameter circle. ***I have this running through about 1000 feet of hose to my FPs, including through those damned 1/4-inch hose fittings and shutoffs. It works, though.***
I don't think it'll be a worry about a timer and your presence. Others will chime in. Oh, there's one now - Hey, Andy! I have the Yankee Kill Switch depicted in-Diary.
Since I'm here, any timer would simply have to have higher-than-needed ratings and be firmly 'plugged in' to avoid any arcing at the outlet - like 'plugged in here' and then the timer, then the pump.
I must mention that a sump pump switch was to be used in my system, but it has not yet gelled. Within a barrel, there's your timer! I can explain that idea in the winter.
Oops - already done. Later---eric g
|
8/22/2023 9:44:58 PM
|
don young |
|
you will need timer that also has capability for pump relay kind of complicated but I installed both this year
|
8/22/2023 10:33:44 PM
|
Steve's Garage |
New Castle, Indiana
|
Ah yes pump relay! That's what I was looking for.
Eric, that one probably would suit my needs. There are numerous pumps I've seen that would work and I am trying to stay in the 120 volt range. If I get a timer with a pump controller and a pump relay I should be able to get it up the way I want. All my hoses are 100 psi.
|
8/23/2023 10:13:28 AM
|
pumpkinpal2 |
Syracuse, NY
|
Yay! Only Fall and Winter to get through, now! eg
|
8/23/2023 3:59:48 PM
|
Total Posts: 7 |
Current Server Time: 11/23/2024 12:13:48 PM |
|